UK manufactured aluminium tower and certified to BS EN1004 for rigorous use. SWL 750kg per tower .Industrial alloy towers offer a safe means of access in every situation - on site, in the factory and warehouse, around the office or shopping complex, in schools and churches, even around the home for those who require only the best!
These aluminium towers are full industrial duty & manufactured robustly from 50mm diameter alloy tubing for regular use and compliance with all current Health & Safety regulations.
Platform levels can be varied in height at approximately 500mm ( 1’ 7” ) intervals, ensuring a comfortable working height wherever the job.
• All frames are interchangeable as lowers, uppers or guardrail frames without modification or additional components. Special guardrail frames are NOT required.
• Correct guardrail height is guaranteed when platforms are fitted to the third rung below the top of the tower and guardrail braces are fitted to two rungs above the platform.
• All aluminium towers are tested, approved & "kitemarked" to the new BS EN1004 (previously known as HD1004). EN1004 is the European-wide standard for mobile aluminium access towers.
• Also supplied with all components to comply with the Work at Height Regulations 2005 and HSE approved 3T erection method.
• When erected on stairs or very uneven ground, lower frames can be offset to cater for the different levels.
• Platform heights up to 12m ( 40ft )
• Choice of three lengths - 2.0m ( 6ft ) / 2.5m ( 8ft ) / 3.0m ( 10ft )
• Choice of two widths - 1.35m ( 4’ 5” ) Double Width & 0.70m ( 2' 50") standard sizes.
PASMA - The lead trade association in Europe for the mobile access tower industry.
You are viewing the text version of this site.
To view the full version please install the Adobe Flash Player and ensure your web browser has JavaScript enabled.
Need help? check the requirements page.